10-20-2014 10:56 PM
Dear Friends,
our management want to know about 6509 restart cause...any one help me regarding this activity ..
we have lms 4.0
Solved! Go to Solution.
10-22-2014 02:25 PM
10-21-2014 12:32 AM
Post the complete output to the command "sh version".
10-21-2014 04:39 AM
Cisco IOS Software, s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Versio
n 12.2(33)SXJ2, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Wed 14-Dec-11 19:51 by prod_rel_team
ROM: System Bootstrap, Version 12.2(17r)SX7, RELEASE SOFTWARE (fc1)
cc-cor-sw-01 uptime is 31 weeks, 5 days, 23 hours, 47 minutes
Uptime for this control processor is 5 hours, 29 minutes
Time since cc-cor-sw-01 switched to active is 5 hours, 5 minutes
System returned to ROM by Stateful Switchover at 14:18:48 UTC Wed Mar 7 2012 (SP
by power on)
System image file is "sup-bootdisk:s72033-advipservicesk9_wan-mz.122-33.SXJ2.bin
"
Last reload reason: reload
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco WS-C6509-E (R7000) processor (revision 1.5) with 458720K/65536K bytes of m
emory.
Processor board ID SMC141700NW
SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache
Last reset from s/w reset
1 SSC-400 controller (1 IPSEC).
40 Virtual Ethernet interfaces
116 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
1917K bytes of non-volatile configuration memory.
8192K bytes of packet buffer memory.
65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102
10-21-2014 02:40 PM
Can you post the output to the command "sh red summary"?
10-22-2014 06:36 AM
Redundant System Information :
------------------------------
Available system uptime = 32 weeks, 1 hour, 44 minutes
Switchovers system experienced = 2
Standby failures = 0
Last switchover reason = active unit failed
Hardware Mode = Simplex
Configured Redundancy Mode = sso
Operating Redundancy Mode = sso
Maintenance Mode = Disabled
Communications = Down Reason: Simplex mode
Current Processor Information :
-------------------------------
Active Location = slot 5
Current Software state = ACTIVE
Uptime in current state = 23 hours, 18 minutes
Image Version = Cisco IOS Software, s72033_rp Software (s72033_
rp-ADVIPSERVICESK9_WAN-M), Version 12.2(33)SXJ2, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Wed 14-Dec-11 19:51 by prod_rel_team
BOOT = sup-bootdisk:s72033-advipservicesk9_wan-mz.122-
33.SXJ2.bin,1;
Configuration register = 0x2102
Peer (slot: unavailable) information is not available because it is in 'DISABLED
' state
10-22-2014 02:25 PM
Last switchover reason = active unit failed
This is the reason.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide