09-26-2013 01:45 PM
I have Cisco Prime LMS 4.2 deployed. How can I use it to determine which of my routers and switches are not configured to support ssh? Clearly I could log into each device and do it by trial and error but I'd like something a little more elegent. I wasn't hopeing there is a best practices report or something already built in but I don't see it.
Thank you,
Tod
Solved! Go to Solution.
09-27-2013 10:13 AM
Hi Tod,
so Basically you need the get the Capabality of the devices with SSH
As per my understanding DIRECTLY it is not possible to get this , however I can suggest you one thing:
Create a CUSTOME INVENTORY Report
Report >report designer > Inventory
you can custom the report based on IMAGE ( usually the IMAGES with K9 have the capabilty of SSH)
check the below link:
Thanks-
Afroz
[Do rate the useful post]
09-26-2013 10:01 PM
Hi Tod,
You can to check if the device are Configured with SSH ?
Or you wanted to check if Device are capable of configuring the SSH ?
Thanks-
Afroz
09-27-2013 06:13 AM
I want to figure out 2 things.
1. What devices are NOT capable of SSH.
2. What devices are capabile SSH but not currently configured for SSH.
09-27-2013 10:13 AM
Hi Tod,
so Basically you need the get the Capabality of the devices with SSH
As per my understanding DIRECTLY it is not possible to get this , however I can suggest you one thing:
Create a CUSTOME INVENTORY Report
Report >report designer > Inventory
you can custom the report based on IMAGE ( usually the IMAGES with K9 have the capabilty of SSH)
check the below link:
Thanks-
Afroz
[Do rate the useful post]
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide