01-27-2016 10:34 AM
We've imported a site's router + switches but only see the IPs for attached Cisco devices. We have CDP and DHCP Snooping enabled on the switches. What else is needed to be configured for Prime to see the IP of all wired clients? Prime 3.0 & switches are 3750V2s
Solved! Go to Solution.
02-01-2016 09:23 PM
It correlates several data sources - the MAC address table of the L2 switch and the ARP cache of the L3 gateway are the two most notable ones. It can also pull in data from an ISE M&T node if you have that product running.
Is your PI managing the gateway device for VLAN 3 in your example?
01-27-2016 11:56 AM
Hi Prime is only able to view Cisco devices it wont be able to see pcs/printers etc
01-27-2016 02:09 PM
02-01-2016 09:23 PM
It correlates several data sources - the MAC address table of the L2 switch and the ARP cache of the L3 gateway are the two most notable ones. It can also pull in data from an ISE M&T node if you have that product running.
Is your PI managing the gateway device for VLAN 3 in your example?
02-02-2016 09:03 AM
We logged in the next day and all wired client's IPs were showing. We did have all L2 and L3 devices imported. Thanks for the input and all has been well.
02-01-2016 08:29 AM
Waited another day and all of the IPs for all wired clients (printers, pcs, etc) showed up and working as we wanted automagically.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide