Wireless Lan Controller PSK reset after manual fail-over

[mattblue84]

Hi All,

We have two Wireless Lan Controllers running in HA (5508 - 7.6.130.33).

We had an infrastructure is which caused a fail-over from the primary to the secondary controller.

We manually failed back over from the secondary to the primary controller and we beleive this cased an issues with a PSK we have configured for an SSID, we had to reset the PSK after the manual fail-over.

Been looking through doco but unable to find anything relevent

Can anybody confirm if this behavior is normal?

Thanks in advance

Matt

[Leo Laohoo]

Post the complete output to the command "sh coredump summary". 

[mattblue84]

Hi Leo,

Unfortunately coredump is not enabled - the last dump was in 2014 

Thanks for replying

Matt