05-20-2019 11:38 AM
I need to setup 5525-X with FireSight 750 from the scratch. (complete wipe out and rebuild)
What is the stable version for the following
1) ASA IOS =
2) ASA ASDM =
3) SFR Boot Image =
4) SFR Package =
5) FireSight 750 Boot Image =
Any other updates I should select?
Solved! Go to Solution.
05-20-2019 07:52 PM - edited 05-20-2019 07:57 PM
1. ASA. (runs ASA software, not IOS). Cisco currently recommends 9.8(3)29. I am steering customers towards the latest 9.10(1) interim build since 9.8(3) has some security vulnerabilities and 9.8(4) has a significant VPN bug.
https://software.cisco.com/download/home/284143129/type/280775065/release/9.10.1%20Interim
2. ASDM. 7.12(1).
https://software.cisco.com/download/home/284143129/type/280775064/release/7.12.1
3 & 4. Firepower. 6.2.3.10 is Cisco's current recommendation. Personally I'd lean more towards 6.3.0.3. You boot and install the base version (e.g.6.3.0) and then patch to the latest patch. The img and pkg files are here:
https://software.cisco.com/download/home/286271172/type/286277393/release/6.3.0
5. Firepower Management Center. (Firesight name not used since the introduction of 6.0 thought you still see it in places on cisco.com). Also 6.3.0.3. You would image using "Cisco_Firepower_Mgmt_Center-6.3.0-83-Restore.iso" and then download and install the 6.3.0.3 patch.
https://software.cisco.com/download/home/286261232/type/286271056/release/6.3.0
05-20-2019 07:52 PM - edited 05-20-2019 07:57 PM
1. ASA. (runs ASA software, not IOS). Cisco currently recommends 9.8(3)29. I am steering customers towards the latest 9.10(1) interim build since 9.8(3) has some security vulnerabilities and 9.8(4) has a significant VPN bug.
https://software.cisco.com/download/home/284143129/type/280775065/release/9.10.1%20Interim
2. ASDM. 7.12(1).
https://software.cisco.com/download/home/284143129/type/280775064/release/7.12.1
3 & 4. Firepower. 6.2.3.10 is Cisco's current recommendation. Personally I'd lean more towards 6.3.0.3. You boot and install the base version (e.g.6.3.0) and then patch to the latest patch. The img and pkg files are here:
https://software.cisco.com/download/home/286271172/type/286277393/release/6.3.0
5. Firepower Management Center. (Firesight name not used since the introduction of 6.0 thought you still see it in places on cisco.com). Also 6.3.0.3. You would image using "Cisco_Firepower_Mgmt_Center-6.3.0-83-Restore.iso" and then download and install the 6.3.0.3 patch.
https://software.cisco.com/download/home/286261232/type/286271056/release/6.3.0
05-21-2019 12:14 AM
I hope with Firepower 6.3 version I can manage sensor of 6.2 version
05-21-2019 05:44 AM
You can. FMC 6.3 can manage sensors from 6.1 through 6.3.
This is documented here:
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide