802.1x

[nettuno8_20111]

Hi, I activated 801.1X on the 2960 Catalist switch but the hosts are unable to authenticate on the switch. I get logs regarding the authentication failure. can anyone help me? Thank you.

[balaji.bandi]

what ISE Version, what Switch IOS code running ? what configuration you applied on the switch ?

what you see on ISE Live Logs ?

You need to troubleshoot and understand the setup :

https://community.cisco.com/t5/security-knowledge-base/ise-secure-wired-access-prescriptive-deployment-guide/ta-p/3641515

[nettuno8_20111]

Hi, I don't have a radius server, the user must authenticate on the switch

[MHM Cisco World]

You can not use local user in sw for 802.1x you need aaa server. It mandatory 

MHM

[balaji.bandi]

802.1x  deployment means identity - who you are, what to access .

So Local user not feasible, look for different methods to protect the ports.

Another note - what is the use case here 

[MHM Cisco World]

debug radius
debug access-session all
debug dot1x all

Share output of above 

MHM