10-30-2013 06:58 AM - edited 03-11-2019 07:58 PM
I set up AAA authentication for traffic going through my firewall. That causes the PINGs to be denied. I assume that is by design. What protocols would cause a prompt to display so the originator could traverse the FW? I'm not sure how AAA functions in this regard.
Thanks.
Solved! Go to Solution.
10-30-2013 07:15 AM
Hello Jimmy,
When you talk about traffic going through your firewall are u referring to Cut-through Proxy??
If U use Cut-Through Proxy u will get a promtp for traffic such as telnet, HTTP,HTTPS and FTP.
If u want to authenticate other traffic u should use virtual-telnet, virtual HTTP or HTTP redirect.
Here are some blogs posts on my website talking about this:
http://www.laguiadelnetworking.com/asa-http-redirect/
http://www.laguiadelnetworking.com/asa-virtual-http-and-virtual-telnet/
Rate all of the helpful posts!!!
Regards,
Jcarvaja
Follow me on http://laguiadelnetworking.com
10-30-2013 07:15 AM
Hello Jimmy,
When you talk about traffic going through your firewall are u referring to Cut-through Proxy??
If U use Cut-Through Proxy u will get a promtp for traffic such as telnet, HTTP,HTTPS and FTP.
If u want to authenticate other traffic u should use virtual-telnet, virtual HTTP or HTTP redirect.
Here are some blogs posts on my website talking about this:
http://www.laguiadelnetworking.com/asa-http-redirect/
http://www.laguiadelnetworking.com/asa-virtual-http-and-virtual-telnet/
Rate all of the helpful posts!!!
Regards,
Jcarvaja
Follow me on http://laguiadelnetworking.com
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide