ACS 5.3 to 5.6 Upgrade Procedure

[Santosh Kolte]

Can anyone tell me about ACS upgrade procedure  from 5.3 to 5.6 . which Available Patches we need to install or we can do it directly.

Please Help!!

Regards,

Santosh

[jaikris · Accepted solution]

Hello Santosh,

                              Please refer the below upgrade guide.

http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-6/installation/guide/csacs_book/csacs_upg.html

Let me know if you have further doubts.

Regards,

Jai Ganesh K

[Santosh Kolte]

STEP	FILE	COMMAND
Apply 5.3 patch 8	5-3-0-40-8.tar.gpg	acs patch install 5-3-0-40-8.tar.gpg repository ftpserver
Apply Pointed Patch	Pointed-PreUpgrade-CSCum04132-5-3-0-40.tar.gpg	acs patch install Pointed-PreUpgrade-CSCum04132-5-3-0-40.tar.gpg repository ftpserver
Apply 5.5	ACS_5.5.0.46.tar.gz	application upgrade ACS_5.5.0.46.tar.gz ftpserver
Apply 5.5 patch 6	5-5-0-46-6.tar.gpg	acs patch install 5-5-0-46-6.tar.gpg repository ftp_repository_name
Apply 5.6	ACS_5.6.0.22.tar.gz	application upgrade ACS_5.6.0.22.tar.gz ftpserver

Upgraded Successfully with above Patches & application Software's 

[jaikris · Accepted solution]

Hello Santosh,

                             Thank you for updating the same. Hope the document  link provided to you was helpful.  Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question.  Otherwise, feel free to post follow-up questions.

Regards,

Jai Ganesh K

[micahacruz]

What FTP server did you use?