Active/Passive FWSM

[ramikamel911]

Hi guys,

I've 2 core switches with 1 FW Module in each switch..

i want to make a failover configuration between the two FWSM [Active/Passive], so if one goes down other will work..

there is any config guide or document i can follow?

or kindly let me know how to do it..

regards,

[Syed Iftekhar Ahmed · Accepted solution]

You can find

Example at

http://www.cisco.com/en/US/docs/security/fwsm/fwsm32/configuration/guide/exampl_f.html#wp1049436

Configuration guide at

http://www.cisco.com/en/US/docs/security/fwsm/fwsm32/configuration/guide/fail_f.html

Syed Iftekhar Ahmed

[ramikamel911]

Thanks man, i did the configuration & its working fine...