10-01-2014 06:55 AM - edited 02-21-2020 05:17 AM
I have a pair of 555X in HA mode. Each have SFR modules. I have a Virtual FMC. I added 2 URL Filtering and 2 Malware licenses and the protection license into the FMC. I have added the modules into FMC.
I can't seem to allocate a URL license or Malware license to the modules. The licenses are grayed out under Devices\licenses.
10-08-2014 09:34 AM
Michael,
Let me look into this issue and reply to this post.
Thanks,
Merv Reyes
Acquisition Program Manager - Sourcefire
10-08-2014 03:08 PM
Hi Michael,
I think you have converted an existing ASA 555X sensor with SFR modules. You have a Virtual Defense center. For any sensor you need to first install "PROTECT+CONTROL" license on the DC.
You need to order the "ASA555x-CTRL-LIC=" PID, a PAK will be sent along with this PID. Upon registration of the PAK you will hash for "PROTECT+CONTROL" license.
Once you register the "PROTECT+CONTROL" license you should be able to add MALWARE and URLFilter.
Thanks,
V.Dhanasekaran (DD)
Business Analyst , SourceFire
01-29-2015 12:23 PM
I have L-ASA5545-TAMC= : Cisco ASA5545 FirePOWER IPS, Apps, AMP and URL Licenses, which should be Protect, Control, URL and Malware, but license files received from Cisco only contain Malware and URL.
01-29-2015 04:08 PM
Protect and control pak comes in the sealed envelope inside the ASA boxes.
01-30-2015 08:21 AM
We already had existing 5545-X appliances before FirePOWER was available, and we added the licensing after the fact just recently.
02-03-2015 09:49 AM
I think you have converted an existing ASA 555X sensor with SFR modules. For any sensor you need to first install "PROTECT+CONTROL" license on the DC.
You need to order the "ASA5545x-CTRL-LIC=" PID, a PAK will be sent along with this PID. Upon registration of the PAK you will hash for "PROTECT+CONTROL" license.
Once you register the "PROTECT+CONTROL" license you should be able to add MALWARE and URLFilter.
02-03-2015 10:38 AM
Yes, I was able to get it taken care of this morning. By default the L-ASA5545-TAMC comes with the Control license, it was an oversight on Cisco's part and it was never sent. The TAC engineer I worked with this morning corrected the oversight. I received the license and applied it.
Thank you for the info!
12-08-2016 12:35 AM
Just posting to say you saved me a lot of time :) too used to receiving the licences by e-mail. Thanks!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide