aip-ssm10 management and internet access

[kolawole1]

Dear Sir,

I have ASA 5510 with aip-ssm 10.My issue is how to have access to the module from the lan and allow it to connect to internet. i have created a static translation: static (inside,csc) tcp 10.10.10.5 https 172.16.100.5 2000 netmask 255.255.255.255.

10.10.10.5 is the ip address of the ssm card and 172.16.100.5 is an ip address not assigned in my inside lan but it is not working.Please Help.

[rhermes]

There is an ethernet connection on teh AIP-SSM module. Do you have this connected to your LAN?

You can session into the AIP-SSM module from the ASA console to cheange the IP address of the sensor.

[kolawole1]

Dear Sir,

I am able to solve the problem.I have patted the management network.

Thank you.