cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

7729
Views
0
Helpful
0
Replies
Highlighted
Beginner

Allow outbound traffic to Meraki cloud on udp port 7351 on an ASA 5512x

Hello, I got some Meraki MS350-24x and they are supposed to automatically connect to the Meraki dashboard and they do if I connect the directly to the modem but behind the ASA 5512x won't leave the local network

this is what I'm supposed to configure

Source IP [Sorting up]
Destination IP
Ports
Protocol
Direction
Description
Devices using this rule
Your network(s) 108.161.147.0/24, 199.231.78.0/24, 64.62.142.12/32, 54.193.207.248/32 7351 UDP outbound Meraki cloud communication Access points, Cameras, MX Security Appliance, Phones, Switches
Your network(s) 17.0.0.0/8 443, 2195-2196, 5223 TCP outbound iOS Systems Manager communication  Systems Manager
Your network(s) Any 80, 443, 5228-5230 TCP outbound Systems Manager agent communication, Backup Meraki cloud communication, Android Systems Manager communication  Access points, Cameras, MX Security Appliance, Phones, Switches, Systems Manager
Your network(s) 64.62.142.2/32, 108.161.147.0/24, 199.231.78.0/24 993, 7734, 7752, 60000-61000 TCP outbound Backup configuration downloads, Mac/Windows agent communication, Throughput tests live tool, Backup firmware downloads, Mac/Windows remote desktop Access points, Cameras, MX Security Appliance, Phones, Switches, Systems Manager
Your network(s) Any 123 UDP outbound NTP time synchronization  Access points, Cameras, MX Security Appliance, Switches

.

I thought it would be as easy as adding some lines to an existing ACL but nothing

I tried something like this for instance:

access-list inside_access_in extended permit udp any any eq 7351

Do I need to create some NAT rules?

Can somebody please provide some sample config on the best way to do this?

Thank you

0 REPLIES 0
Content for Community-Ad