05-12-2020 03:08 AM - edited 05-12-2020 04:03 AM
Hi,
I have FirePOWER 2100 but I am using ASA code. I am migrating from ASA 5510 to FIrePOWER 2100.
In the previous setup, with ASA 5510, I have Redundant interfaces configured, but the FirePOWER 2100 does not support this kind of interfaces.
What can I use as an alternative to Redundant Interface?
Thanks!
Solved! Go to Solution.
05-13-2020 06:52 AM
You can use a logical interface called port-channel. Port-channels or Ether-channels support up to 8 interfaces in the group (on the 2100). If you use 2 interfaces in the port-channel, you actually double your speed across that link. Should one link fail the other will be active and keep the connection up.
In this platform the port-channel is setup in the FXOS. See:
Hope that helps.
05-13-2020 06:52 AM
You can use a logical interface called port-channel. Port-channels or Ether-channels support up to 8 interfaces in the group (on the 2100). If you use 2 interfaces in the port-channel, you actually double your speed across that link. Should one link fail the other will be active and keep the connection up.
In this platform the port-channel is setup in the FXOS. See:
Hope that helps.
05-16-2020 03:52 AM
05-31-2020 03:10 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide