- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-16-2013 11:07 PM - edited 03-11-2019 06:29 PM
Hello
is there a easy to install SSL certificate on ASA, rather than enroll with a public CA? ASDM has a place to import certificates. Can I just upload a SSL certificate I got from my CA to ASA, withou setup CA enrollment? And if yes, how can I generate a SSL certificate request from my ASA 8.2?
Thanks a lot
Solved! Go to Solution.
- Labels:
-
NGFW Firewalls
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-17-2013 01:26 PM
Hi,
As for generating a certificate signing request, you might want to check the following:
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00808b3cff.shtml
HTH
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-17-2013 01:26 PM
Hi,
As for generating a certificate signing request, you might want to check the following:
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00808b3cff.shtml
HTH
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-17-2013 04:31 PM
thanks a lot. this is really helpful.
