02-04-2011 02:04 PM - edited 03-11-2019 12:45 PM
I'm trying to configure remote access vpn. I can connect from my web browser and login fine.
When I use the AnyConnect client, after entering in the ip address and port number, I get prompted about the certificate warning, I get prompted for my username and password, and after entering my password, I'm getting the message
AnyConnect is not enabled on the VPN server
How do I enable AnyConnect in the remote access vpn setup? I'm doing this all from CLI only.
Solved! Go to Solution.
02-05-2011 04:39 AM
Hi,
Why don't enable the group-policy and tunnel-group for anyconnect. this way the user specific issues can be eliminated.
The following link gives you all the details of the configuration:
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00808efbd2.shtml
Regards,
Anisha
- Do rate helpful posts.
02-04-2011 02:35 PM
svc enable
02-04-2011 03:29 PM
post the config
02-04-2011 03:37 PM
Thanks for your interest. I've narrowed it down: the particular user is not enabled for svc. Once I enable this user, it should be good.
02-05-2011 04:39 AM
Hi,
Why don't enable the group-policy and tunnel-group for anyconnect. this way the user specific issues can be eliminated.
The following link gives you all the details of the configuration:
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00808efbd2.shtml
Regards,
Anisha
- Do rate helpful posts.
02-05-2011 07:57 AM
Thanks for link.
07-30-2019 09:32 AM
link gets a 404 error message.
07-30-2019 08:37 PM
@JoshThurston9204 wrote:
link gets a 404 error message.
That's because the original thread is 8 years old.
If you want a current example of SSL VPN setup on an ASA, please see this one:
There are many more also available for more specific use cases.
If you have specific questions, please start a new discussion.
07-22-2014 03:49 AM
Hi
Can you please post the command you used to enable svc for that particular user?
Thanks
06-20-2024 08:47 AM
If you SSH to the ASA:
configure terminal
webvpn
anyconnect enable
Make sure anyconnect is enabled for your specific group policies as well.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide