Solved: Re: AnyConnect Mobile

lcaruso · ‎08-10-2012

Hi,

I just installed an AnyConnect Mobile license on an ASA 5510 but haven't had time to do much else. Does the ASA require any further configuration to support mobile clients, or will the existing AnyConnect setup suffice?

Thanks.

Karsten Iwen · ‎08-11-2012

It's enough to install the license. You don't need any other config to let your mobile users in.

Sent from Cisco Technical Support iPad App

--
If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.

View solution in original post

Karsten Iwen · ‎08-11-2012

It's enough to install the license. You don't need any other config to let your mobile users in.

Sent from Cisco Technical Support iPad App

--
If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.

lcaruso · ‎08-11-2012

Thanks

Sharmeelan Mahendrarajah · ‎06-03-2013

Additional tasks can be done such as modify the client profile for the tunnel group if you would like to control "Connect on Demand". This feature allows the app to establish a vpn tunnel when a specific URL suffix is matched. This requires cert authentication

Sent from Cisco Technical Support iPhone App