Network Security

Engage with peers and experts on network security topics such as Secure Firewall Threat Defense, Adaptive Security Appliance, Secure Firewall Management Center, and Security Cloud Control.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Join

 
Labels

Forum Posts

So I have an ASA 5510 connected to our ISP that's providing us a block of 5 static IP's.  One of the interfaces is setup to use one of those IP's.  The other interfaces that are configured are all directed to and seen as that static IP.  When I try t...

backpage1 by Level 1
  • 2626 Views
  • 4 replies
  • 0 Helpful votes

Hi All,I'm not able to access a vlan from another vlan.Let me explain it deeply:I've got a 3750 switch connected through a non switched port to the asa.I've implemented ospf routing to pass directly all the vlans behind the 3750 to the asa and it's w...

Hi Gurus of CiscoI want to synchronize my devices that are on the outside interface (please see the image bellow)My Firewall has the following configuration:!interface GigabitEthernet0/0 nameif outside security-level 0 ip address 181.66.39.100 255.25...

a.guillen by Level 1
  • 662 Views
  • 1 replies
  • 0 Helpful votes

We have recently purchased a Cisco ASA 5512-X and I'm just curious if there is anyway for the ASA or a 3rd party tool working with the ASA, to monitor Decode/Reencode SSL traffic? Otherwise, anyone can simply access a ssl web site e.g. https://www.yo...

saicuser1 by Level 1
  • 4743 Views
  • 1 replies
  • 0 Helpful votes

                   I think i have configured an ASA 5505 for DMZ.There is an outside ip 96.229.98.123, which should allow remote access (3389) to a computer which should bea DMZ, 10.1.1.99.I am unable to get to this computer (windows XP) using the ou...

Hi gurus of Cisco.Could you explain me please, what meaning this line:!First Natglobal (outside) 101 36.161.215.110 netmask 255.255.255.255nat (inside) 101 0.0.0.0 0.0.0.0!Seconf Natnat (WAN-Inside) 0 access-list WAN-Inside_nat0_outboundnat (inside) ...

a.guillen by Level 1
  • 516 Views
  • 1 replies
  • 0 Helpful votes

We’re currently (and have been) able to log VPN access through our firewall for our IPSEC clients via RADIUS in MS InternetAuthentication Service (IAS) on our domain controller.  However, moving forward with LDAP authentication, we need a replacement...

kardos420 by Level 1
  • 3679 Views
  • 3 replies
  • 0 Helpful votes

Hello to you allI have a very big ACL I want to implement (over 1000 lines), and I´m trying to minimize the impact and latency an ACL this size would bring to the network, so I wanted to group my networks and services into different object and servic...

Zarahelll by Level 1
  • 2317 Views
  • 8 replies
  • 0 Helpful votes