ASA 5505 switch from Mode: access Port to Trunk on the fly via CSM ?

[Alfred Berberich]

                   Hi

Can I configure the Port at the ASA 5050 from Mode: access Port to trunk during the FW is running in a production area without console access ?

As I know at the 5505 ist should work

sincerley

Alfred

[Jennifer Halim]

Are you using the same access port to access the ASA via CSM? If you are, then i would strongly recommend console access.

If you are using a different port to make the changes, then yes you can configure it. However, I would still recommend configuring it during non production hour, just in case there is an issue.

[Alfred Berberich]

Jennifer you are right , it worked thx

[Jennifer Halim]

Excellent to hear. Thanks for the update.

Pls kindly mark the post answered so others can learn from it. Thanks.