07-15-2013 02:05 AM - edited 03-11-2019 07:12 PM
Hi,
I have a Cisco ASA 5505 firewall running in transparent mode. The configuration is fairly basic- a management IP, basic threat detection settings, inside/outside VLANs etc. This firewall normally has one server connected to it- this works fine.
However, when adding another two servers, neither work. I have verified that the switch ports are enabled, and the servers are configured in an almost identical manner to the working one (same software stack, networking etc) in the same server rack, but when they are connected to the ASA they lose all external network connectivity.
Does anyone have any idea why this issue is occuring?
07-15-2013 06:14 AM
Are you using base license?
07-15-2013 06:17 AM
Yes- I believe so.
07-15-2013 06:30 AM
Then probably your issue somehow is related to the "user-limit"? I mean something like what they have here:
07-15-2013 06:36 AM
That was my first thought, but show local-host displays the following:
Licensed host limit: Unlimited.
07-15-2013 08:19 AM
configure log to debugging and reproduce the issue then get show log?
Sent from Cisco Technical Support iPad App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide