03-20-2018 04:49 AM - edited 02-21-2020 07:32 AM
I have deleted all files on my ASA 5505 firewall. I have loaded a image from a local tftp-server. When I after the reboot tries to set a IP address on interface ethernet0/0 I get this error:
ERROR: This command can only be configured on VLAN interfaces.
Please help.
Solved! Go to Solution.
03-20-2018 05:01 AM
Hi there,
The ethernet interfaces on the 5505 only operate at layer 2. You need to configure and VLAN SVI and apply the VLAN to the interface.
eg:
! int vlan 2 nameif outside ip address 192.168.2.254 255.255.255.0 security-level 0 ! int eth0/0 no shut switchport access vlan 2 !
cheers,
Seb.
03-20-2018 05:01 AM
Hi there,
The ethernet interfaces on the 5505 only operate at layer 2. You need to configure and VLAN SVI and apply the VLAN to the interface.
eg:
! int vlan 2 nameif outside ip address 192.168.2.254 255.255.255.0 security-level 0 ! int eth0/0 no shut switchport access vlan 2 !
cheers,
Seb.
03-20-2018 05:15 AM
Thanks for the quick reply Seb Rupik.
03-20-2018 05:48 AM
Now that the ASA is running again I need the ASDM I cannot download it from the ASA. How can I get it?
03-20-2018 09:00 AM
You just download it from Cisco download page. Make sure the ASDM version "is inline" with the FW software version; read compatibility guide.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide