06-05-2010 11:40 PM - edited 03-11-2019 10:55 AM
Here is the asa 5505 Configuration. VPN is not responding. When I check my IP address in the website "whatismyip.com" it is showing A.B.C.X. I believe it shoud be A.B.C.A. Also I am not able to access (https://A.B.C.A) firewall from public untrusted network. Please help .
Thanks,
siva
Solved! Go to Solution.
06-06-2010 12:16 AM
Sivakumar,
Could it be that your ISP is doing some sort of proxy or NAT for some connections - like http you mentioned?
A simple packet capture on ASA will show you if the ASA is receiveing those packets.
Marcin
06-06-2010 12:16 AM
Sivakumar,
Could it be that your ISP is doing some sort of proxy or NAT for some connections - like http you mentioned?
A simple packet capture on ASA will show you if the ASA is receiveing those packets.
Marcin
06-06-2010 12:36 AM
Can you please tell me the packet capture procedure?
Thanks.
06-06-2010 12:50 AM
Sivakumar,
There you go:
http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a0080a9edd6.shtml
http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a00807c35e7.shtml
(You can apply same logic for to the box and through the box traffic capture, except you don't need to capture on two interfaces)
Marcin
06-16-2010 11:39 AM
The problem has been figured out. Firewall configuration is correct. But there was a small coniguration missing in netopia router, i.e, I had to turn off NAT functionality. Now all right.
Thanbks for responding to my thread.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide