Network Security

Engage with peers and experts on network security topics such as Secure Firewall Threat Defense, Adaptive Security Appliance, Secure Firewall Management Center, and Security Cloud Control.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Join

 
Labels

Forum Posts

I have a PIX 506e which I wish to use to access our LAN by VPN. I can  make a VPN connection from inside the LAN but I can't from home (eg  outside of our office network). I guess it may be some simple setting I  have over looked to enable WAN VPN ac...

dbairdpub by Community Member
  • 1889 Views
  • 8 replies
  • 0 Helpful votes

ForumI am working at a Cisco customer site today.  While looking at some configurations on the customer firewall, I happened to notice that the ACL that they have on their WAN interface on the ASA had a permit ip any any at the end of the ACL.  I ask...

Hi all,   Basically I am taking my first stab at configuring a fwsm in a 6509 with a sup 720. The scenerio I need help with is this: I have 2 SVI interfaces coming into my layer 3 switch. I want to pass these 2 SVI interfaces and my ACS local SVI int...

scmeis1 by Community Member
  • 1354 Views
  • 4 replies
  • 0 Helpful votes

I need to be able to use the 'inside' IP address of an ASA 5510 (v8.2) as the recognized DNS server configured in TCP/IP settings on internal workstations.I understand that the ASA cannot act as a DNS server, but can the "ip dns server" and "ip name-...

jeff.carr by Level 1
  • 17676 Views
  • 6 replies
  • 0 Helpful votes

Hi,i have been doing some ZBF configuration on 2811 router with IOS version "advsecurityk9-mz.124-15.T10"i configured a zone-pair from inside to outside with its policy-map and class-map (for the traffic that are initiated from inside),the flow is 90...

Hi All,I have Cisco ASA5505 configured with one inside VLAN (10.10.10.x) and one OUTSIDE VLAN.I have activated an IpSec Site to Site TUNNEL VPN with a partner and he wants to see my network like 10.10.20.x (instead of 10.10.10.x) because he has alrea...

mariomark by Community Member
  • 2116 Views
  • 4 replies
  • 0 Helpful votes

Hello:I have a PIX501 with the standard license on it.  Can it be configured so I can VPN directly into it?  I know I can configure it as a site-to-site VPN.  Does anyone know for sure?Harrison

HMidkiff by Level 3
  • 655 Views
  • 1 replies
  • 0 Helpful votes

Hi,I need to configure hairpinnig to asa with 8.3 software.There is a web server located in lan. Clients have to connect it via public name, and name resolves to public ip.I have static nat for that server - it works fine from outside, but inside hos...

jtillonen by Community Member
  • 3587 Views
  • 6 replies
  • 0 Helpful votes