08-01-2018 01:38 AM - edited 02-21-2020 08:02 AM
why on asa5506 there are no such option as route outside?!
(config)# route ?
configure mode commands/options:
Current available interface(s):
Null0 Null interface
inside Name of interface BVI1
mgmt Name of interface Management1/1
Solved! Go to Solution.
08-01-2018 02:27 AM
seems the ASA was in routed mode, but I expected it in transparent mode,
sorry my bad,
I've set it into transparent mode, now no problem with setting related default gateway.
p.s. after command 'firewall transparent' the device sets itself into default basic config, which requires to reconfigure it.
08-01-2018 01:55 AM
08-01-2018 02:04 AM
such config is there:
interface GigabitEthernet1/1
description "uplink"
bridge-group 1
nameif outside
security-level 0
!
interface GigabitEthernet1/2
description "client interface"
bridge-group 1
nameif inside1
security-level 100
08-01-2018 02:27 AM
seems the ASA was in routed mode, but I expected it in transparent mode,
sorry my bad,
I've set it into transparent mode, now no problem with setting related default gateway.
p.s. after command 'firewall transparent' the device sets itself into default basic config, which requires to reconfigure it.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide