ASA 5506 - SNMP access fail if secondary unit

[alain_bcr]

Hi,

using a couple of ASA 5506 in an active/standby cluster, the primary unit (Active) reply to ping and snmpwalk request from a remote PC, but the secondary unit (Standby ready) do reply to the ping but fail to reply to the snmpwalk request.

I feel it strange as both unit share the same configuration. They should behave the same way ?

What is wrong here ?

Thx for any help !

Alain Bourcier

[balaji.bandi]

You need to SNMP against Physical Manangement IP rather Virtual IP.

check and make sure you have ACL allowed for your SNMP Access.

[alain_bcr]

Hello,

will check my configuration and keep you in touch.