ASA 5506-X (ASDM) EZVPN configuration

[Roza12]

Hi Guys

i'm going to configure new asa 5506-x with EZVPN and the procedure will be :

New loaction (D) will be add to network with new ASA 5506-x

ADSL, Public IP server as signed (DHCP) 100/30.
setup DHCP scope on the AD controller

 i'm trying to find material how to configure ezvpn in asdm but i couldn't find anything 

i didn't configure EZVPN before so what is the procedure or steps that i should do ?

Thanks in Advance

[Sheraz.Salim]

here is a good reference guide to start with

https://www.petenetlive.com/KB/Article/0001261

[Roza12]

Hi 

thanks for your reply

i've read that before but i need material for configuring ezvpn in asdm and how the procedure to make this connection work 

[Sheraz.Salim]

oh sorry did not read your post properly.

i know for sure there is no wizard setup to run a EZVPN in ASDM. however. it will be a flaky to use ASDM as you have to go here and there.

might some one else can guide you. I am run out of options.

[Roza12]

so we can only configure ezvpn through CLI  we cannot do that through GUI ???

[Sheraz.Salim]

as long as you know how to navigate between the ASDM you can do it. I personally not a big fan of ASDM. prefer CLI more.