ASA 5510 Error in config

[h.parsons]

After I upgraded my ASA to v7.0(4) I noticed an error in the running-config "ERROR: Command requires failover license" so I removed the the monitor-interface commands and saved to mem but the error statements stayed in the running-config. I then copied the startup-config to my tftp server removed the error statements and then copied it back. I reloaded the ASA and these same error message came back. I did a "show start err" and it returned no errors. Can someone tell me how to get these messages out of my config.

[gfullage · Accepted solution]

You're running into a cosmetic bug, nothing to worry about.

See http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsc23718&Submit=Search for details.

This is fixed in interim code version 7.0(4.2), you can upgrade to the latest interim version (7.0(4.3), fully TAC supported) here:

http://www.cisco.com/cgi-bin/tablebuild.pl/pix-interim

You can see in the Release Notes all the fixed bugs, including the one you're hitting.