Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
CUCM 10.5Jabber 11.01 I cant seem to get video to work with Jabber in conference call. I can get video between two Jabber clients but when I add the third it will drop the video and continue with just audio. I have tried this using a Meet Me conferen...
How do I configure blades in a Cat 6500 that are not installed. I am configuring a supervisor for one of my 6500's to replace an existing sup and I don't want to build a entire switch just to configure the sup. The new sup is running v12.2(18)
We use several Dedicated Micros digital video recorders connected to Cat6509 switches running CatOS v8.5(9). we also run port security on all ports with the following configuration: set port security 3/36 enable age 1 maximum 1 shutdown 1 unicast-flo...
A group of my users cannot use RDP while connected to the corporate network using the Anyconnect client if they have a DSL home connection. We are using ASA 5520's version 8.03. I took one user to test with and we used his laptop and connected it to ...
We'll I have partly figured out my problem and I'll post just in case any one else has this problem. The above config actually worked but I was testing using a "meet me" conference which was my problem. If I started a "meet me" by pressing the "meet ...
Are you running a dynamic routing protocol like EIGRP on the ASA's? If so the standby will not be routing and you may have to get on the same subnet with it.
