01-21-2014 07:33 PM - edited 03-11-2019 08:34 PM
Access to the internal server internal use public IP address
asa 5512 ios 8.6.1
01-23-2014 04:18 PM
Hello,
Can you further elaborate on your question.
Have you configured the NAT and ACL.
Can you run a packet tracer:
Assuming the external interface name is outside and the connection is on port tcp/80;
packet in outside tcp 8.8.8.8 1025 server_public_IP 80
Regards,
Felipe.
Remember to rate useful posts.
01-24-2014 06:11 AM
Hi Qiu,
If I am understanding you correctly you want to access internal server from behind same interface on it's public ip. If that is the case you could do the following configuration:
Suppose server internal ip is 1.1.1.1 and it's public ip is 2.2.2.2 and server is behind inside interface.
object network obj-1.1.1.1
host 1.1.1.1
exit
object network obj-2.2.2.2
host 2.2.2.2
exit
nat (inside,inside) source dynamic any interface destination static obj-2.2.2.2 obj-1.1.1.1
Hope that helps!
- Prateek Verma
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide