ASA 5512-X

[Colin Higgins]

I am having soem difficulty getting documentation and setup procedures for the new ASA 5512-X (or X models in general) firewalls.

I know the IPS sensor is a software-based one, but I'm not sure how much different the setup in than with a 5510 and IPS module.

Also, is the IOS upgrade procedure different?

Any advice or pointing in the right direction will be appreciated.           

[Julio Carvajal · Accepted solution]

Hello,

Follow these links, they cover pretty much everything

http://www.cisco.com/en/US/docs/security/ips/7.1/configuration/guide/cli/cli_asa_ips.html

http://www.cisco.com/en/US/products/sw/secursw/ps2113/products_tech_note09186a0080bd5d03.shtml

http://www.cisco.com/en/US/products/sw/secursw/ps2113/products_tech_note09186a0080bd5d00.shtml

[harvisin]

Hello,

I went through your query and I think that the following link's might help you:-

http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/modules_ips.html#wp1088096

http://www.cisco.com/en/US/products/sw/secursw/ps2113/products_tech_note09186a0080bd5d03.shtml

http://www.cisco.com/en/US/products/sw/secursw/ps2113/products_tech_note09186a0080bd5d00.shtml