Not able to access 5515 X IPS through web browser but able to do telnet and ssh.I can ping my IPS IP from my desktop.Please suggest ...
Not able to access 5515 X IPS through web browser but able to do telnet and ssh.I can ping my IPS IP from my desktop.Please suggest ...
Hi Everyone,When we config failover interface on ASA which is in multi context mode and is active active.We do that in system space with this command.failover lan int F1 GigabitEthernet0/2failover interface ip F1 192.168.50.x 255.255.255.0 standb...
Hi guys,need lil guidance or pointing in right direction. we have upgraded 8.2 to 8.6 and i am having lil issue in changing nat syntax .....Firewall with 8.2 has few exemption rules configured, below is my config on 8.6 for exempting vpn traffic for ...
Hi everyone,When config failover link of ASA in Active Standby mode.When we config failover int say gi0/1config tint gi0/1failover lan int gi0/1Need to confirm we do this from interface config mode only or we can do this from global config also ??...
Hi,I have read several posts, but i can't find one that helps with my doubtsI know if a have a 5505 with a 10 user license y will limit to 10 the IPs that pass from inside to outside, but from inside to dmz? Also this are users not connections? Is th...
Hi, Just purchased a ASA5505 for my CCNA SecurityI want to use one of the interface (the outside interface VLAN2 port eth0/0) to connect to my home network to be able to mange it and use ADSM form my PC. This eth0/0 is set for DHCP on the ASA and I o...
HiWe have our ASA 5540 in our hosting site and it has just been made the default gateway from our network out to the internet.Inside hosts translate to the Outside cards Public IP address as you would expect when you route out.Yet my problem is all i...
Hi folks,Recently, I got help by Jouni restricting port access from the outside. Previously, I allowed IP, and ICMP from outside, and for example traceroute displayed the router names/addresses. After only allowing those ports open that correspond to...
Hi folks,I'm setting up an ASA 5512-X, replacing our old Linux firewall/router.In the old firewall, I had a port opened to an OpenVPN server inside the network. I've opened access to the same port in the ASA. The OpenVPN server is reachable from the ...
Hello,Can anyone recommend any resources (white papers, books, etc) that can help me understand the ASA's IPS SSM? I activated one once before, but that had been a while. Seems like there was a labl somewhere that took it step-by-step, but I can't se...
Dear TeamI m getting the following error in ASA in CSM whenever i m clicking on Address Pools,Translation Options & Translation Rules under NAT section.This data for this policy is locked by activity/user: <abc>. After couple of restart and performin...
I recently swapped ASAs from version 8.3 or 4 to 9.1. All in all the change went well but I've run into a curious problem.Prior to the swap we could SSH to a virtual Amazon Web server. Since the swap we cannot.I find a TON of articles on how to set u...
Hi.Suppose i have classic static IPSec with remote site like this:crypto map CRYPTOMAP 10 ipsec-isakmp set peer x.x.x.x set transform-set TS match address crypto_aclip access-list extended crypto_acl permit ip 10.1.0.0 0.0.255.255 10.2.0.0 0.0.255.2...
HiI have ASA 5510 (software version 8.2) working as sitetosite vpn endpoint in datacenter 1. I have a server in datacenter 2. I would like the ASA to forward packets to the server in datacenter 2 transparently so that the clients are unware of the da...
Hello AllNeed some help with our DMZ SERVERS?We need our Web, VPN servers to have internet access, we configured the ACL to allow this, and the logs show this failing.Do we need NAT plus the ACL to allow this?Please give commands for ASDM - step-by-s...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 06-24-2026 08:00 AM | ||
| 05-26-2026 07:54 AM | ||
| 05-02-2026 06:09 AM | ||
| 04-30-2026 12:46 AM | ||
| 04-24-2026 07:04 AM |
| User | Count |
|---|---|
| 6 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |