cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
5943
Views
0
Helpful
9
Replies

ASA 5515 - Internal Interfaces Down

Kibo
Level 1
Level 1

Dear all,

I was wondering if you could give me some ideas about this issue.

 

We were alerted through our monitoring system that three interfaces on our ASA5515 (ASA 5515-X with SW) were having an issue:

- asa_mgmt_plane

- Internal-Data0/1

- mgmt_plane_int_tap

Each Interface reported: SNMP_EXCEPTION_NOSUCHINSTANCE

 

So I checked the ASA and noticed the two of the three interfaces were indeed down:

Interface Internal-Data0/0 "asa_mgmt_plane", is down, line protocol is down
Interface Internal-Data0/1 "", is down, line protocol is down

Interface Internal-Data0/2 "mgmt_plane_int_tap", is up, line protocol is up

 

We do not see any performance issues - at this stage. 

Ah - we are running 9.8(3)18

 

Looking forward to hearing from you.

 

Greetings Stephan

 

 

9 Replies 9

balaji.bandi
Hall of Fame
Hall of Fame

Is this HA environment ? worth checking Physical cables make sure they are intact 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Hi - It is HA setup indeed - but these three interfaces are logical, right?...

No cables involved here :)

Logical Bind to Physical Interface right, what is that interface status ?

 

what you see that physcail interface connected to switch (do you see Switch Logs, and ASA Logs )

Provide more Log information and  how these device connected ?

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Logical Bind to Physical Interface right, what is that interface status?

 --> I do not think so in this instance...
 -->Which interface exactly would you be interested in?

 

The ASA has several (routed) interfaces and a failover link of course. But look at the names:

- asa_mgmt_plane

- Internal-Data0/1

- mgmt_plane_int_tap

 

They all appear to be ASA internal logical interface - i.e. backplane/bus or CPU/Memory related.

 

thanks for your help

Greetings

Appologies, i read wrong orginally the one you posted.

 

Can you please post  below output to understand better :

 

#show interface ip brief

# show interface detail| begin Internal-Data

 

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Hello again,

 

sorry for the belated reply - I was traveling the last three days.

 

See the .txt attached.

 

Greetings Stephan

HI BB - I was wondering - did you manage to have a look at the .txt files i posted?

 

Or anyone else with a clever idea ?

 

Greetings Stephan

it Might have missed from radar.

 

you can ignore this interface, nothing will effect in your environment

 

So I checked the ASA and noticed the two of the three interfaces were indeed down:

Interface Internal-Data0/0 "asa_mgmt_plane", is down, line protocol is down
Interface Internal-Data0/1 "", is down, line protocol is down

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

?Hi BB,


thanks for your feedback - this is all very odd.

According to our Monitoring these interface only went down a couple of weeks ago...

Very odd - Like I said - we do not see any service impact...


It's more a matter of - I want to understand what happened...

Anyway... Guess we just delete them errors in our monitoring system..


Greetings Stephan


Review Cisco Networking for a $25 gift card