Hello,
I am trying to upgrade the AIP SSM 20 to IPS-K9-6.2-4-E4.pkg.
The problem is that this error as below comes:-
Error: execUpgradeSoftware : Connect failed
I can confirm the following:-
1) Ping from FTP server to sensor and vice versa is OK
2) FTP server works OK, as i am able to upload/download files from other clients
3) Command given is as upgrade ftp://anonymous@192.168.1.56/IPS-K9-6.2-4-E4.pkg
4) I also created another user in FTP server, tested but same results
5) The FTP server listens on port 21 and does not gets any request.
6) Current image is a bit old i.e. 6.0(4)E2
Some information from show version is as:-
Using 1023815680 out of 2093600768 bytes of available memory (48% usage)
system is using 17.7M out of 29.0M bytes of available disk space (61% usage)
application-data is using 39.3M out of 166.8M bytes of available disk space (25% usage)
boot is using 38.4M out of 68.6M bytes of available disk space (59% usage)
Image that i am trying to upload i.e. IPS-K9-6.2-4-E4.pkg. is about 28.6 MB in size, could the issue be related to the disk size (show in bold above)?
Please help
Thanks in advance.
PG
