cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
5392
Views
1
Helpful
3
Replies

ASA 5550 port channel

darijohorvat
Beginner
Beginner

Hi

Is it possible to bundle two ASA interfaces to port-channel interface?

Thanks,

D.

1 Accepted Solution

Accepted Solutions

Jon Marshall
Hall of Fame
Hall of Fame

darijohorvat wrote:

Hi

Is it possible to bundle two ASA interfaces to port-channel interface?

Thanks,

D.

D

Not it's not. The ASA does not support etherchannel.

Jon

View solution in original post

3 Replies 3

Jon Marshall
Hall of Fame
Hall of Fame

darijohorvat wrote:

Hi

Is it possible to bundle two ASA interfaces to port-channel interface?

Thanks,

D.

D

Not it's not. The ASA does not support etherchannel.

Jon

Thanks!

BR,

D.

Hi darijohorvat

Cisco ASA release 8.4(1) added support for LACP.  EtherChannel is now a support option.

EtherChannel support (ASA 5510 and higher)


You can configure up to 48 802.3ad EtherChannels of eight active interfaces each.


Note You  cannot use interfaces on the 4GE SSM, including the integrated 4GE SSM  in slot 1 on the ASA 5550, as part of an EtherChannel.


We introduced the following commands: channel-group, lacp port-priority, interface port-channel, lacp max-bundle, port-channel min-bundle, port-channel load-balance, lacp system-priority, clear lacp counters, show lacp, show port-channel.

Regards

Donald

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: