cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
786
Views
5
Helpful
1
Replies

ASA 5585 HA interface count

rasmus.elmholt
Level 11
Level 11

Hi,

 

I have an ASA 5585-x in a failover setup and I am looking at the interface counters.

 

On one of the 1 gig interfaces the total transmitted bandwidth seems to be 390MB/s but how is that possible on a 1G interface?

 

GigabitEthernet0/1:
        received (in 1121322.584 secs):
                278548458887 packets    61252187325059 bytes
                248000 pkts/sec 54624001 bytes/sec
        transmitted (in 1121322.584 secs):
                426592345515 packets    438024642403278 bytes
                380000 pkts/sec 390632003 bytes/sec
      1 minute input rate 6725 pkts/sec,  2204002 bytes/sec
      1 minute output rate 8205 pkts/sec,  4337058 bytes/sec
      1 minute drop rate, 0 pkts/sec
      5 minute input rate 6913 pkts/sec,  2137111 bytes/sec
      5 minute output rate 8864 pkts/sec,  5165176 bytes/sec
      5 minute drop rate, 0 pkts/sec
1 Reply 1

balaji.bandi
Hall of Fame
Hall of Fame

This could be replication between devices (if this is HA Link) - i see some of Firepower use 600/700MB for replication.

 

just get accurate information clear the counters and check, also check on the switch side where this connected to validate this informaiton is correct.

 

BB

=====️ Preenayamo Vasudevam ️=====

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Review Cisco Networking for a $25 gift card