09-11-2013 10:03 AM - edited 03-11-2019 07:36 PM
Hi there.
I'm about to upgrade our 5510 software.
Like the title states we're going from 8.4(4) to 9.1.2.
Is there any important changes? Like the NAT from 8.2.5 to 8.4?
Is it just a typical upgrade? Or is there anything i need to specific aware of?
The setup is primary used for l2tp dial in and clientless ssl(we're upgrading the firmware for this reason, to get it up2date)
Thanks!
Regards, Søren.
Solved! Go to Solution.
09-11-2013 10:29 AM
Hi Soeren,
The upgrade is fairly staright forward, no changes in NAT or acl or any other portion of configuration. Follow the generic procedure to upgrade the ASA's:
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008067e9f9.shtml
In case, devices are in failover:
http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/admin_swconfig.html#wp1380398
Always check out the release notes for the version you want to upgrade to:
http://www.cisco.com/en/US/docs/security/asa/asa91/release/notes/asarn91.html
HTH.
-
Regards,
Sourav Kakkar
09-11-2013 10:29 AM
Hi Soeren,
The upgrade is fairly staright forward, no changes in NAT or acl or any other portion of configuration. Follow the generic procedure to upgrade the ASA's:
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008067e9f9.shtml
In case, devices are in failover:
http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/admin_swconfig.html#wp1380398
Always check out the release notes for the version you want to upgrade to:
http://www.cisco.com/en/US/docs/security/asa/asa91/release/notes/asarn91.html
HTH.
-
Regards,
Sourav Kakkar
09-26-2013 01:23 AM
The upgrade went smooth!
Thanks for your reply!
09-26-2013 04:49 AM
Awesome! :-)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide