05-02-2019 05:22 PM - edited 05-02-2019 05:22 PM
Hi All,
There was a power outage in my building and when the power resumed my Primary (Active) FW went to Secondary state and the Secondary (Standby) FW became Primary state.
I have reverted back the Secondary to Primary as the initial setup and all is good now.
My Question is how to know the uptime of my Primary and Secondary FW.
I tried the below commands:
show failover
show failover state
show version | include uptime
But my manager is saying he dont want these uptimes he want to know what is the actual uptime of these devices.
Can anyone please help on this how can i see the actual uptime of these two FW?
Kind Regards,
Ken
05-02-2019 07:04 PM - edited 05-02-2019 07:05 PM
Within the "show version" output you will see the uptime for both the individual unit and the HA pair.
For example, here's one I manage. You can see the primary unit has been up about 5 minutes longer since I upgraded it first just recently and then the secondary unit as soon as the primary was back in ready state. The overall pair has been up since a facility power outage 110 days ago:
<host name redacted>/pri/act# sh ver Cisco Adaptive Security Appliance Software Version 9.8(4) Firepower Extensible Operating System Version 2.2(2.119) Device Manager Version 7.10(1) Compiled on Tue 23-Apr-19 08:41 PDT by builders System image file is "disk0:/asa984-smp-k8.bin" Config file at boot was "startup-config" <host name redacted> up 12 mins 15 secs failover cluster up 110 days 14 hours <snip> <host name redacted>/sec/stby# sh ver Cisco Adaptive Security Appliance Software Version 9.8(4) Firepower Extensible Operating System Version 2.2(2.119) Device Manager Version 7.10(1) Compiled on Tue 23-Apr-19 08:41 PDT by builders System image file is "disk0:/asa984-smp-k8.bin" Config file at boot was "startup-config" <host name redacted> up 6 mins 54 secs failover cluster up 110 days 14 hours
05-02-2019 07:40 PM
Hi Marvin,
Thx for replying, let me check on this.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide