09-15-2015 12:09 PM - edited 03-11-2019 11:36 PM
I am trying to export a config from a 5520 running 8.4.7 that includes all network objects. Presently I only get network object groups and the rest are IP addresses. Without changing anything on a 5540 running 8.2.5 it exported everything as desired - both network objects and network object groups. Cannot find the setting associated with this. Any help would be greatly appreciated. Thanks!
09-15-2015 01:26 PM
If you just need the configuration you can run:
copy start tftp
from the cli. You'll need to set up tftpd32 from your laptop or another device and point it there.
09-15-2015 01:29 PM
Sorry - I meant to say the ACL export via ASDM.
09-15-2015 01:40 PM
I see so in ASDM -> configuration -> access rules-> export it does not break out the acls with object groups in them?
If so, a show access-list will break these out from the cli... Will that work?
09-17-2015 04:18 AM
Hi,
You would not be able to use the Network Objects as they are only available on ASA 8.3 +.
Thanks and Regards,
Vibhor Amrodia
09-17-2015 12:18 PM
It works fine with 8.2.5 but not with 8.4.7.
09-17-2015 12:17 PM
It exports the names of the network object groups but not the network objects.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide