ASA Config Export - 8.4.7

[dennis_range]

I am trying to export a config from a 5520 running 8.4.7 that includes all network objects. Presently I only get network object groups and the rest are IP addresses. Without changing anything on a 5540 running 8.2.5 it exported everything as desired - both network objects and network object groups. Cannot find the setting associated with this. Any help would be greatly appreciated. Thanks!

[Josh Sprang]

If you just need the configuration you can run:

copy start tftp

from the cli.  You'll need to set up tftpd32 from your laptop or another device and point it there. 

[dennis_range]

Sorry - I meant to say the ACL export via ASDM.

[Josh Sprang]

I see so in ASDM -> configuration -> access rules-> export it does not break out the acls with object groups in them? 

If so, a show access-list will break these out from the cli...  Will that work? 

[Vibhor Amrodia]

Hi,

You would not be able to use the Network Objects as they are only available on ASA 8.3 +.

Thanks and Regards,

Vibhor Amrodia

[dennis_range]

It works fine with 8.2.5 but not with 8.4.7.

[dennis_range]

It exports the names of the network object groups but not the network objects.