cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
8613
Views
0
Helpful
4
Replies

ASA Conn Count

AIG Cisco Admin
Level 1
Level 1

Hi Techs,,

Output of below command on ASA shows 1358 in use, & 4610 Most used,

how to interpret this,, is it 1358 active connections OR 4610 are the active connections ASA is handaling.

show conn count

1358 in use, 4610 most used

Thanks.

2 Accepted Solutions

Accepted Solutions

Marcin Latosiewicz
Cisco Employee
Cisco Employee

Current connection count is 1358, the maximum we saw is 4610

for reference:

http://www.cisco.com/en/US/docs/security/asa/asa84/command/reference/s2.html#wp1437635

View solution in original post

"clear conn" should clear current connections.

Max connections stays intact.

bsns-asa5505-19# sh conn

0 in use, 7 most used

bsns-asa5505-19# clear conn

0 connection(s) deleted.

bsns-asa5505-19# sh conn

0 in use, 7 most used

View solution in original post

4 Replies 4

Marcin Latosiewicz
Cisco Employee
Cisco Employee

Current connection count is 1358, the maximum we saw is 4610

for reference:

http://www.cisco.com/en/US/docs/security/asa/asa84/command/reference/s2.html#wp1437635

Thanks Marcin,

so if i clear the conn... then the most used value would be max conn seen after the clear right, or it would be max conn seen so far...

Thanks.

"clear conn" should clear current connections.

Max connections stays intact.

bsns-asa5505-19# sh conn

0 in use, 7 most used

bsns-asa5505-19# clear conn

0 connection(s) deleted.

bsns-asa5505-19# sh conn

0 in use, 7 most used

Many Thanks for the demonstration...

Review Cisco Networking for a $25 gift card