09-25-2019 09:40 AM - edited 01-28-2021 01:11 AM
Hello.
May be You find simple way to monitoring ASA Active/Standby Failover cluster in PRTG.
I complete this sensor and You can use it for free:
http://www.ciscolive.ru/products.html
http://www.powerc.ru/download/asafileoverstatus.zip
You need run cisco REST API Agent on asa and use user with low privelege level.
I can adapt this sensor for other sysmem (not PRTG), if need.
UPD:
New version (add IP address verification, dedicated ke for port and FQDN test):
http://www.powerc.ru/download/asafailover2.11.zip
https://github.com/OlegPowerC/PRTGSensorASA_Failover
UPD:
All PRTG ASA sensors (native and my)
01-14-2021 10:26 PM
Hi Oleg,
I find this script for custom PRTG sensor very useful. I'm using it for some ASA clusters and its working great!
However, we have some ASA clusters with custom HTTPS port and they seem to be having issues with your script.
Is it possible to add a parameter so that we can input custom port?
Thank you.
01-15-2021 07:10 AM
Hello!
Yes it is possible.
I will make change and tell You where it will be complete.
01-17-2021 11:21 PM
Hi Oleg,
Awesome, thank you!
01-18-2021 02:09 AM
Hello!
I try to:
1. CLI ASA:
no http server enable
http server enable 7443
2. Change sensor settings and replase -i %host by -i %host:7443
And it work.
I can add separate parameter but I think this solution acceptable.
Please try and tell me result.
Thank You
01-18-2021 02:28 AM
Hi Oleg,
I've actually tried this method already but it wasn't working for me. Let me check again.
01-18-2021 02:43 AM
Ok. I will add separate parameter today and version control and upload to site.
Also how You change REST API port?
01-18-2021 03:11 AM
Hi Oleg,
It's working now.
-i %host:7443 <-- this option works!
I just didn't add http <server IP> <interface> on the firewall earlier to allow http from the PRTG probe server.
01-18-2021 03:33 AM
Good.
May be You need any other PRTG sensors?
01-18-2021 07:27 PM
I'm good for now. Thank you so much!
03-01-2022 01:19 PM
followed steps and get PRTG sensor error "Invalid IP" any advice? was able to add the custom exe sensor and the .exe but when it runs it errors on an IP issue??
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide