ASA Failover

[anva12345]

Hi all

I have two ASAs configured in Active/standby failover in single context mode .Is it possible to configure failover such a way that when Primary unit comes up after filover, it becomes automatically active ?

Thanks in advance

[ajagadee]

Hi,

Preempt feature in Failover on the ASA is ONLY available in Active/Active Setup and not in Active/Standby. Please review the link below:

http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/p.html#

wp1840534

below is a link on Active/Active Failover:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example091

86a0080834058.shtml

Regards,

Arul

*Pls rate if it helps*

[anva12345]

Thanks Arul for the information and link