cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

2218
Views
0
Helpful
1
Replies
Patrick Weir
Beginner

ASA Firepower installation stuck in recovery

Trying to get the the boot image installed on an ASA5515-X and it appears to hang at this portion of the installation and never finishes the recovery

Mod-sfr 797> Starting OpenBSD Secure Shell server: sshd

 

Here is the complete debug (200) output 

 

Mod-sfr 402> *** EVENT: Creating the Disk Image...

Mod-sfr 403> *** TIME: 11:02:07 CDT Mar 12 2015

Mod-sfr 404> ***

Mod-sfr 405> ***

Mod-sfr 406> *** EVENT: The module is being recovered.

Mod-sfr 407> *** TIME: 11:02:07 CDT Mar 12 2015

Mod-sfr 408> ***

 

BELPRODF02# Mod-sfr 409> ***

Mod-sfr 410> *** EVENT: Disk Image created successfully.

Mod-sfr 411> *** TIME: 11:04:35 CDT Mar 12 2015

Mod-sfr 412> ***

Mod-sfr 413> ***

Mod-sfr 414> *** EVENT: Start Parameters: Image: /mnt/disk0/vm/vm_3.img, ISO: -cdrom /mnt/disk0

Mod-sfr 415> /asasfr-5500x-boot-5.3.1-152.img, Num CPUs: 2, RAM: 3730MB, Mgmt MAC: F0:7F:06:C3:

Mod-sfr 416> B4:3F, CP MAC: 00:00:00:04:00:01, HDD: -drive file=/dev/md0,cache=none,if=virtio, 

Mod-sfr 417> Dev

Mod-sfr 418> ***

Mod-sfr 419> *** EVENT: Start Parameters Continued: RegEx Shared Mem: 0MB, Cmd Op: r, Shared Me

Mod-sfr 420> m Key: 8061, Shared Mem Size: 16, Log Pipe: /dev/ttyS0_vm3, Sock: /dev/ttyS1_vm3, 

Mod-sfr 421> Mem-Path: -mem-path /hugepages

Mod-sfr 422> *** TIME: 11:04:35 CDT Mar 12 2015

Mod-sfr 423> ***

Mod-sfr 424> Mod-sfr 425> Warning: vlan 0 is not connected to host network

Mod-sfr 426> ISOLINUX 3.73 2009-01-25  Copyright (C) 1994-2008 H. Peter Anvin

Mod-sfr 427>                    Cisco SFR-BOOT-IMAGE and CX-BOOT-IMAGE for SFR - 5.3.1

Mod-sfr 428>     (WARNING: ALL DATA ON DISK 1 WILL BE LOST)

Mod-sfr 429> Loading bzImage........................................................

Mod-sfr 430> Loading initramfs.gz..............................................................

Mod-sfr 431> ..................................................................................

Mod-sfr 432> ..................................................................................

Mod-sfr 433> ..................................................................................

Mod-sfr 434> ..................................................................................

Mod-sfr 435> ..................................................................................

Mod-sfr 436> ..................................................................................

Mod-sfr 437> ........................ready.

Mod-sfr 438> [    0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00

Mod-sfr 439> [    0.000000] Initializing cgroup subsys cpuset

Mod-sfr 440> [    0.000000] Initializing cgroup subsys cpu

Mod-sfr 441> [    0.000000] Linux version 2.6.28.10.x86-target-64 (build@cel64build.esn.sourcef

Mod-sfr 442> ire.com) (gcc version 4.3.3 (MontaVista Linux Sourcery G++ 4.3-292) ) #1 SMP PREEM

Mod-sfr 443> PT Thu Jun 12 18:45:27 EDT 2014

Mod-sfr 444> [    0.000000] Command line: initrd=initramfs.gz console=ttyS0,9600 BOOT_IMAGE=bzI

Mod-sfr 445> mage 

Mod-sfr 446> [    0.000000] KERNEL supported cpus:

Mod-sfr 447> [    0.000000]   Intel GenuineIntel

Mod-sfr 448> [    0.000000]   AMD AuthenticAMD

Mod-sfr 449> [    0.000000]   Centaur CentaurHauls

Mod-sfr 450> [    0.000000] PAT WC disabled due to known CPU erratum.

Mod-sfr 451> [    0.000000] BIOS-provided physical RAM map:

Mod-sfr 452> [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)

Mod-sfr 453> [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)

Mod-sfr 454> [    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)

Mod-sfr 455> [    0.000000]  BIOS-e820: 0000000000100000 - 00000000dfffe000 (usable)

Mod-sfr 456> [    0.000000]  BIOS-e820: 00000000dfffe000 - 00000000e0000000 (reserved)

Mod-sfr 457> [    0.000000]  BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)

Mod-sfr 458> [    0.000000]  BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)

Mod-sfr 459> [    0.000000]  BIOS-e820: 0000000100000000 - 0000000109200000 (usable)

Mod-sfr 460> [    0.000000] DMI 2.4 present.

Mod-sfr 461> [    0.000000] last_pfn = 0x109200 max_arch_pfn = 0x3ffffffff

Mod-sfr 462> [    0.000000] last_pfn = 0xdfffe max_arch_pfn = 0x3ffffffff

Mod-sfr 463> [    0.000000] init_memory_mapping: 0000000000000000-00000000dfffe000

Mod-sfr 464> [    0.000000] last_map_addr: dfffe000 end: dfffe000

Mod-sfr 465> [    0.000000] init_memory_mapping: 0000000100000000-0000000109200000

Mod-sfr 466> [    0.000000] last_map_addr: 109200000 end: 109200000

Mod-sfr 467> [    0.000000] RAMDISK: 7dc00000 - 7ffffaeb

Mod-sfr 468> [    0.000000] ACPI: RSDP 000FD920, 0014 (r0 BOCHS )

Mod-sfr 469> [    0.000000] ACPI: RSDT DFFFE450, 0034 (r1 BOCHS  BXPCRSDT        1 BXPC        

Mod-sfr 470> 1)

Mod-sfr 471> [    0.000000] ACPI: FACP DFFFFF80, 0074 (r1 BOCHS  BXPCFACP        1 BXPC        

Mod-sfr 472> 1)

Mod-sfr 473> [    0.000000] ACPI: DSDT DFFFE490, 11A9 (r1   BXPC   BXDSDT        1 INTL 2010052

Mod-sfr 474> 8)

Mod-sfr 475> [    0.000000] ACPI: FACS DFFFFF40, 0040

Mod-sfr 476> [    0.000000] ACPI: SSDT DFFFF7A0, 0796 (r1 BOCHS  BXPCSSDT        1 BXPC        

Mod-sfr 477> 1)

Mod-sfr 478> [    0.000000] ACPI: APIC DFFFF680, 0080 (r1 BOCHS  BXPCAPIC        1 BXPC        

Mod-sfr 479> 1)

Mod-sfr 480> [    0.000000] ACPI: HPET DFFFF640, 0038 (r1 BOCHS  BXPCHPET        1 BXPC        

Mod-sfr 481> 1)

Mod-sfr 482> [    0.000000] No NUMA configuration found

Mod-sfr 483> [    0.000000] Faking a node at 0000000000000000-0000000109200000

Mod-sfr 484> [    0.000000] Bootmem setup node 0 0000000000000000-0000000109200000

Mod-sfr 485> [    0.000000]   NODE_DATA [0000000000001000 - 0000000000005fff]

Mod-sfr 486> [    0.000000]   bootmap [000000000000d000 -  000000000002e23f] pages 22

Mod-sfr 487> [    0.000000] (7 early reservations) ==> bootmem [0000000000 - 0109200000]

Mod-sfr 488> [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0

Mod-sfr 489> 000001000]

Mod-sfr 490> [    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0

Mod-sfr 491> 000008000]

Mod-sfr 492> [    0.000000]   #2 [0000200000 - 0000aa5bdc]    TEXT DATA BSS ==> [0000200000 - 0

Mod-sfr 493> 000aa5bdc]

Mod-sfr 494> [    0.000000]   #3 [007dc00000 - 007ffffaeb]          RAMDISK ==> [007dc00000 - 0

Mod-sfr 495> 07ffffaeb]

Mod-sfr 496> [    0.000000]   #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0

Mod-sfr 497> 000100000]

Mod-sfr 498> [    0.000000]   #5 [0000008000 - 000000c000]          PGTABLE ==> [0000008000 - 0

Mod-sfr 499> 00000c000]

Mod-sfr 500> [    0.000000]   #6 [000000c000 - 000000d000]          PGTABLE ==> [000000c000 - 0

Mod-sfr 501> 00000d000]

Mod-sfr 502> [    0.000000] found SMP MP-table at [ffff8800000fdad0] 000fdad0

Mod-sfr 503> [    0.000000] Zone PFN ranges:

Mod-sfr 504> [    0.000000]   DMA      0x00000000 -> 0x00001000

Mod-sfr 505> [    0.000000]   DMA32    0x00001000 -> 0x00100000

Mod-sfr 506> [    0.000000]   Normal   0x00100000 -> 0x00109200

Mod-sfr 507> [    0.000000] Movable zone start PFN for each node

Mod-sfr 508> [    0.000000] early_node_map[3] active PFN ranges

Mod-sfr 509> [    0.000000]     0: 0x00000000 -> 0x0000009f

Mod-sfr 510> [    0.000000]     0: 0x00000100 -> 0x000dfffe

Mod-sfr 511> [    0.000000]     0: 0x00100000 -> 0x00109200

Mod-sfr 512> [    0.000000] ACPI: PM-Timer IO Port: 0xb008

Mod-sfr 513> [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)

Mod-sfr 514> [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)

Mod-sfr 515> [    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])

Mod-sfr 516> [    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])

Mod-sfr 517> [    0.000000] IOAPIC[0]: apic_id 0, version 0, address 0xfec00000, GSI 0-23

Mod-sfr 518> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

Mod-sfr 519> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)

Mod-sfr 520> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

Mod-sfr 521> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)

Mod-sfr 522> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)

Mod-sfr 523> [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000

Mod-sfr 524> [    0.000000] Using ACPI (MADT) for SMP configuration information

Mod-sfr 525> [    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs

Mod-sfr 526> [    0.000000] Allocating PCI resources starting at e2000000 (gap: e0000000:1effc0

Mod-sfr 527> 00)

Mod-sfr 528> [    0.000000] PERCPU: Allocating 53248 bytes of per cpu data

Mod-sfr 529> [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages

Mod-sfr 530> : 937615

Mod-sfr 531> [    0.000000] Policy zone: Normal

Mod-sfr 532> [    0.000000] Kernel command line: initrd=initramfs.gz console=ttyS0,9600 BOOT_IM

Mod-sfr 533> AGE=bzImage 

Mod-sfr 534> [    0.000000] Initializing CPU#0

Mod-sfr 535> [    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)

Mod-sfr 536> [    0.000000] Fast TSC calibration using PIT

Mod-sfr 537> [    0.000000] Detected 3058.625 MHz processor.

Mod-sfr 538> [    0.000999] Console: colour VGA+ 80x25

Mod-sfr 539> [    0.000999] console [ttyS0] enabled

Mod-sfr 540> [    0.000999] allocated 39321600 bytes of page_cgroup

Mod-sfr 541> [    0.000999] please try cgroup_disable=memory option if you don't want

Mod-sfr 542> [    0.000999] Checking aperture...

Mod-sfr 543> [    0.000999] No AGP bridge found

Mod-sfr 544> [    0.000999] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)

Mod-sfr 545> [    0.000999] Placing software IO TLB between 0x20000000 - 0x24000000

Mod-sfr 546> [    0.000999] Memory: 3613368k/4343808k available (4543k kernel code, 524684k abs

Mod-sfr 547> ent, 205756k reserved, 2509k data, 536k init)

Mod-sfr 548> [    0.000999] HPET: 3 timers in total, 0 timers will be used for per-cpu timer

Mod-sfr 549> [    0.001008] Calibrating delay loop (skipped), value calculated using timer freq

Mod-sfr 550> uency.. 6117.25 BogoMIPS (lpj=3058625)

Mod-sfr 551> [    0.002247] Security Framework initialized

Mod-sfr 552> [    0.003422] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)

Mod-sfr 553> [    0.005428] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)

Mod-sfr 554> [    0.006379] Mount-cache hash table entries: 256

Mod-sfr 555> [    0.007075] Initializing cgroup subsys ns

Mod-sfr 556> [    0.007398] Initializing cgroup subsys cpuacct

Mod-sfr 557> [    0.008003] Initializing cgroup subsys memory

Mod-sfr 558> [    0.008371] CPU: L1 I cache: 32K, L1 D cache: 32K

Mod-sfr 559> [    0.008744] CPU: L2 cache: 4096K

Mod-sfr 560> [    0.009005] CPU 0/0x0 -> Node 0

Mod-sfr 561> [    0.009275] ACPI: Core revision 20080926

Mod-sfr 562> [    0.010403] Setting APIC routing to flat

Mod-sfr 563> [    0.011653] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

Mod-sfr 564> [    0.022608] CPU0: Intel QEMU Virtual CPU version 1.5.0 stepping 03

Mod-sfr 565> [    0.023996] Booting processor 1 APIC 0x1 ip 0x6000

Mod-sfr 566> [    0.000999] Initializing CPU#1

Mod-sfr 567> [    0.000999] Calibrating delay using timer specific routine.. 6118.63 BogoMIPS (

Mod-sfr 568> lpj=3059316)

Mod-sfr 569> [    0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K

Mod-sfr 570> [    0.000999] CPU: L2 cache: 4096K

Mod-sfr 571> [    0.000999] CPU 1/0x1 -> Node 0

Mod-sfr 572> [    0.094100] CPU1: Intel QEMU Virtual CPU version 1.5.0 stepping 03

Mod-sfr 573> [    0.097445] checking TSC synchronization [CPU#0 -> CPU#1]: passed.

Mod-sfr 574> [    0.098021] Brought up 2 CPUs

Mod-sfr 575> [    0.098303] Total of 2 processors activated (12235.88 BogoMIPS).

Mod-sfr 576> [    0.099195] net_namespace: 1280 bytes

Mod-sfr 577> [    0.100052] NET: Registered protocol family 16

Mod-sfr 578> [    0.101009] ACPI: bus type pci registered

Mod-sfr 579> [    0.101359] PCI: Using configuration type 1 for base access

Mod-sfr 580> [    0.115532] ACPI: Interpreter enabled

Mod-sfr 581> [    0.115865] ACPI: (supports S0 S5)

Mod-sfr 582> [    0.116065] ACPI: Using IOAPIC for interrupt routing

Mod-sfr 583> [    0.119205] ACPI: No dock devices found.

Mod-sfr 584> [    0.119991] ACPI: PCI Root Bridge [PCI0] (0000:00)

Mod-sfr 585> [    0.122006] pci 0000:00:01.3: quirk: region b000-b03f claimed by PIIX4 ACPI

Mod-sfr 586> [    0.122601] pci 0000:00:01.3: quirk: region b100-b10f claimed by PIIX4 SMB

Mod-sfr 587> [    0.137195] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)

Mod-sfr 588> [    0.138221] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)

Mod-sfr 589> [    0.138833] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)

Mod-sfr 590> [    0.139207] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)

Mod-sfr 591> [    0.140074] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)

Mod-sfr 592> [    0.141144] SCSI subsystem initialized

Mod-sfr 593> [    0.141989] usbcore: registered new interface driver usbfs

Mod-sfr 594> [    0.142503] usbcore: registered new interface driver hub

Mod-sfr 595> [    0.143006] usbcore: registered new device driver usb

Mod-sfr 596> [    0.143434] PCI: Using ACPI for IRQ routing

Mod-sfr 597> [    0.151010] cfg80211: Using static regulatory domain info

Mod-sfr 598> [    0.151452] cfg80211: Regulatory domain: US

Mod-sfr 599> [    0.151806]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

Mod-sfr 600> [    0.151979]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)

Mod-sfr 601> [    0.152978]     (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)

Mod-sfr 602> [    0.153579]     (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)

Mod-sfr 603> [    0.153978]     (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)

Mod-sfr 604> [    0.154546]     (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)

Mod-sfr 605> [    0.154978]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)

Mod-sfr 606> [    0.155978] cfg80211: Calling CRDA for country: US

Mod-sfr 607> [    0.156407] NetLabel: Initializing

Mod-sfr 608> [    0.156407] NetLabel:  domain hash size = 128

Mod-sfr 609> [    0.156977] NetLabel:  protocols = UNLABELED CIPSOv4

Mod-sfr 610> [    0.157406] NetLabel:  unlabeled traffic allowed by default

Mod-sfr 611> [    0.158029] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0

Mod-sfr 612> [    0.158499] hpet0: 3 comparators, 64-bit 100.000000 MHz counter

Mod-sfr 613> [    0.163979] pnp: PnP ACPI init

Mod-sfr 614> [    0.164267] ACPI: bus type pnp registered

Mod-sfr 615> [    0.165797] pnp: PnP ACPI: found 9 devices

Mod-sfr 616> [    0.166171] ACPI: ACPI bus type pnp unregistered

Mod-sfr 617> [    0.172263] bus: 00 index 0 io port: [0x00-0xffff]

Mod-sfr 618> [    0.172689] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]

Mod-sfr 619> [    0.173286] NET: Registered protocol family 2

Mod-sfr 620> [    0.183101] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)

Mod-sfr 621> [    0.185108] TCP established hash table entries: 524288 (order: 11, 8388608 byte

Mod-sfr 622> s)

Mod-sfr 623> [    0.187860] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)

Mod-sfr 624> [    0.188717] TCP: Hash tables configured (established 524288 bind 65536)

Mod-sfr 625> [    0.189347] TCP reno registered

Mod-sfr 626> [    0.192077] NET: Registered protocol family 1

Mod-sfr 627> [    0.192532] checking if image is initramfs...<7>Switched to high resolution mod

Mod-sfr 628> e on CPU 1

Mod-sfr 629> [    1.079428]  it is

Mod-sfr 630> [    2.094536] Freeing initrd memory: 36862k freed

Mod-sfr 631> [    2.103671] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter

Mod-sfr 632>  Oruba

Mod-sfr 633> [    2.107919] HugeTLB registered 2 MB page size, pre-allocated 0 pages

Mod-sfr 634> [    2.108728] VFS: Disk quotas dquot_6.5.1

Mod-sfr 635> [    2.109125] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

Mod-sfr 636> [    2.110191] msgmni has been set to 7129

Mod-sfr 637> [    2.110735] alg: No test for stdrng (krng)

Mod-sfr 638> [    2.111210] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252

Mod-sfr 639> [    2.111882] io scheduler noop registered

Mod-sfr 640> [    2.112233] io scheduler anticipatory registered

Mod-sfr 641> [    2.112643] io scheduler deadline registered

Mod-sfr 642> [    2.113048] io scheduler cfq registered (default)

Mod-sfr 643> [    2.113471] LTT : ltt-relay init

Mod-sfr 644> [    2.113752] ltt-control init

Mod-sfr 645> [    2.144267] LTT : ltt-kprobes init

Mod-sfr 646> [    2.144587] pci 0000:00:00.0: Limiting direct PCI/PCI transfers

Mod-sfr 647> [    2.145116] pci 0000:00:01.0: PIIX3: Enabling Passive Release

Mod-sfr 648> [    2.145640] pci 0000:00:01.0: Activating ISA DMA hang workarounds

Mod-sfr 649> [    2.147095] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

Mod-sfr 650> [    2.148332] processor ACPI_CPU:00: registered as cooling_device0

Mod-sfr 651> [    2.149001] processor ACPI_CPU:01: registered as cooling_device1

Mod-sfr 652> [    2.155233] Non-volatile memory driver v1.2

Mod-sfr 653> [    2.155619] Linux agpgart interface v0.103

Mod-sfr 654> [    2.156146] [drm] Initialized drm 1.1.0 20060810

Mod-sfr 655> [    2.156588] Serial: 8250/16550 driver4 ports, IRQ sharing enabled

Mod-sfr 656> ?[    2.401468] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

Mod-sfr 657> [    2.646438] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A

Mod-sfr 658> [    2.647682] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

Mod-sfr 659> [    2.648468] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A

Mod-sfr 660> [    2.651706] brd: module loaded

Mod-sfr 661> [    2.652936] loop: module loaded

Mod-sfr 662> [    2.653288] Intel(R) Gigabit Ethernet Network Driver - version 1.2.45-k2

Mod-sfr 663> [    2.653866] Copyright (c) 2008 Intel Corporation.

Mod-sfr 664> [    2.654352] pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de

Mod-sfr 665> [    2.654932] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI

Mod-sfr 666> [    2.655507] e100: Copyright(c) 1999-2006 Intel Corporation

Mod-sfr 667> [    2.656140] sky2 driver version 1.22

Mod-sfr 668> [    2.656838] console [netcon0] enabled

Mod-sfr 669> [    2.657175] netconsole: network logging started

Mod-sfr 670> [    2.657699] input: Macintosh mouse button emulation as /devices/virtual/input/i

Mod-sfr 671> nput0

Mod-sfr 672> [    2.658676] Loading iSCSI transport class v2.0-870.

Mod-sfr 673> [    2.659733] Driver 'sd' needs updating - please use bus_type methods

Mod-sfr 674> [    2.660361] Driver 'sr' needs updating - please use bus_type methods

Mod-sfr 675> [    2.661971] scsi0 : ata_piix

Mod-sfr 676> [    2.662458] scsi1 : ata_piix

Mod-sfr 677> [    2.662832] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0c0 irq 14

Mod-sfr 678> [    2.663438] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0c8 irq 15

Mod-sfr 679> [    2.814564] ata1.00: ATA-7: QEMU HARDDISK, 1.5.0, max UDMA/100

Mod-sfr 680> [    2.815102] ata1.00: 6291456 sectors, multi 16: LBA48 

Mod-sfr 681> [    2.815920] ata1.00: configured for MWDMA2

Mod-sfr 682> [    2.978529] ata2.00: ATAPI: QEMU DVD-ROM, 1.5.0, max UDMA/100

Mod-sfr 683> [    2.979440] ata2.00: configured for MWDMA2

Mod-sfr 684> [    2.990106] scsi 0:0:0:0: Direct-Access     ATA      QEMU HARDDISK    1.5. PQ: 

Mod-sfr 685> 0 ANSI: 5

Mod-sfr 686> [    2.991078] sd 0:0:0:0: [sda] 6291456 512-byte hardware sectors: (3.22 GB/3.00 

Mod-sfr 687> GiB)

Mod-sfr 688> [    2.991789] sd 0:0:0:0: [sda] Write Protect is off

Mod-sfr 689> [    2.992231] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn'

Mod-sfr 690> t support DPO or FUA

Mod-sfr 691> [    2.993074] sd 0:0:0:0: [sda] 6291456 512-byte hardware sectors: (3.22 GB/3.00 

Mod-sfr 692> GiB)

Mod-sfr 693> [    2.993751] sd 0:0:0:0: [sda] Write Protect is off

Mod-sfr 694> [    2.994212] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn'

Mod-sfr 695> t support DPO or FUA

Mod-sfr 696> [    2.995031]  sda: unknown partition table

Mod-sfr 697> [    2.996054] sd 0:0:0:0: [sda] Attached SCSI disk

Mod-sfr 698> [    2.996646] sd 0:0:0:0: Attached scsi generic sg0 type 0

Mod-sfr 699> [    2.997424] scsi 1:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     1.5. PQ: 

Mod-sfr 700> 0 ANSI: 5

Mod-sfr 701> [    2.998553] sr0: scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray

Mod-sfr 702> [    2.999036] Uniform CD-ROM driver Revision: 3.20

Mod-sfr 703> [    2.999718] sr 1:0:0:0: Attached scsi generic sg1 type 5

Mod-sfr 704> [    3.000520] Fusion MPT base driver 3.04.07

Mod-sfr 705> [    3.000883] Copyright (c) 1999-2008 LSI Corporation

Mod-sfr 706> [    3.001330] Fusion MPT SPI Host driver 3.04.07

Mod-sfr 707> [    3.001768] Fusion MPT FC Host driver 3.04.07

Mod-sfr 708> [    3.002219] Fusion MPT SAS Host driver 3.04.07

Mod-sfr 709> [    3.002845] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

Mod-sfr 710> [    3.003507] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

Mod-sfr 711> [    3.004109] uhci_hcd: USB Universal Host Controller Interface driver

Mod-sfr 712> [    3.004806] usbcore: registered new interface driver usblp

Mod-sfr 713> [    3.005304] Initializing USB Mass Storage driver...

Mod-sfr 714> [    3.005782] usbcore: registered new interface driver usb-storage

Mod-sfr 715> [    3.006345] USB Mass Storage support registered.

Mod-sfr 716> [    3.006795] usbcore: registered new interface driver libusual

Mod-sfr 717> [    3.007427] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,1

Mod-sfr 718> [    3.008594] serio: i8042 KBD port at 0x60,0x64 irq 1

Mod-sfr 719> [    3.009036] serio: i8042 AUX port at 0x60,0x64 irq 12

Mod-sfr 720> [    3.013351] mice: PS/2 mouse device common for all mice

Mod-sfr 721> [    3.016648] rtc_cmos 00:01: RTC can wake from S4

Mod-sfr 722> [    3.017134] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0

Mod-sfr 723> [    3.017749] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs

Mod-sfr 724> [    3.018404] i2c /dev entries driver

Mod-sfr 725> [    3.018872] md: raid1 personality registered for level 1

Mod-sfr 726> [    3.019533] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-dev

Mod-sfr 727> el@redhat.com

Mod-sfr 728> [    3.020287] cpuidle: using governor ladder

Mod-sfr 729> [    3.020638] cpuidle: using governor menu

Mod-sfr 730> [    3.020976] No iBFT detected.

Mod-sfr 731> [    3.021275] input: AT Translated Set 2 keyboard as /devices/platform/i8042/seri

Mod-sfr 732> o0/input/input1

Mod-sfr 733> [    3.023278] usbcore: registered new interface driver hiddev

Mod-sfr 734> [    3.023839] usbcore: registered new interface driver usbhid

Mod-sfr 735> [    3.024341] usbhid: v2.6:USB HID core driver

Mod-sfr 736> [    3.024875] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11

Mod-sfr 737> [    3.025409] virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, 

Mod-sfr 738> high) -> IRQ 11

Mod-sfr 739> [    3.027001] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10

Mod-sfr 740> [    3.027569] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, 

Mod-sfr 741> high) -> IRQ 10

Mod-sfr 742> [    3.028938] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11

Mod-sfr 743> [    3.029475] virtio-pci 0000:00:07.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, 

Mod-sfr 744> high) -> IRQ 11

Mod-sfr 745> [    3.031003]  vda: vda1

Mod-sfr 746> [    3.032549] Advanced Linux Sound Architecture Driver Version 1.0.18rc3.

Mod-sfr 747> [    3.034527] ALSA device list:

Mod-sfr 748> [    3.034794]   No soundcards found.

Mod-sfr 749> [    3.035177] Netfilter messages via NETLINK v0.30.

Mod-sfr 750> [    3.035611] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)

Mod-sfr 751> [    3.036246] ctnetlink v0.93: registering with nfnetlink.

Mod-sfr 752> [    3.036908] IPv4 over IPv4 tunneling driver

Mod-sfr 753> [    3.037675] ip_tables: (C) 2000-2006 Netfilter Core Team

Mod-sfr 754> [    3.038169] TCP cubic registered

Mod-sfr 755> [    3.038465] Initializing XFRM netlink socket

Mod-sfr 756> [    3.038933] NET: Registered protocol family 10

Mod-sfr 757> [    3.040665] lo: Disabled Privacy Extensions

Mod-sfr 758> [    3.041684] tunl0: Disabled Privacy Extensions

Mod-sfr 759> [    3.042375] ip6_tables: (C) 2000-2006 Netfilter Core Team

Mod-sfr 760> [    3.042875] IPv6 over IPv4 tunneling driver

Mod-sfr 761> [    3.043522] sit0: Disabled Privacy Extensions

Mod-sfr 762> [    3.044109] NET: Registered protocol family 17

Mod-sfr 763> [    3.044688] RPC: Registered udp transport module.

Mod-sfr 764> [    3.045112] RPC: Registered tcp transport module.

Mod-sfr 765> [    3.045727] registered taskstats version 1

Mod-sfr 766> [    3.242125] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/s

Mod-sfr 767> erio1/input/input2

Mod-sfr 768> [    4.549043] Sending DHCP and RARP requests ...<7>eth0: no IPv6 routers present

Mod-sfr 769> [   21.537267] ... timed out!

Mod-sfr 770> [   92.321352] IP-Config: Reopening network devices...

Mod-sfr 771> [   93.823080] Sending DHCP and RARP requests ...<7>eth0: no IPv6 routers present

Mod-sfr 772> [  108.353265] ... timed out!

Mod-sfr 773> [  172.902353] IP-Config: Auto-configuration of network failed.

Mod-sfr 774> [  172.902863] Freeing unused kernel memory: 536k freed

Mod-sfr 775> INIT: version 2.86 booting

Mod-sfr 776> Please wait: booting...

Mod-sfr 777> mount: sysfs already mounted or /sys busy

Mod-sfr 778> mount: according to mtab, sysfs is already mounted on /sys

Mod-sfr 779> Starting udev [  172.947403] udevd version 124 started

Mod-sfr 780> [  173.057815] udev: renamed network interface eth0 to cplane

Mod-sfr 781> [  173.061928] udev: renamed network interface eth1 to eth0

Mod-sfr 782> and populating dev cache 

Mod-sfr 783> Root filesystem already rw, not remounting

Mod-sfr 784> Configuring network interfaces... done.

Mod-sfr 785> net.ipv4.conf.default.rp_filter = 1

Mod-sfr 786> net.ipv4.conf.all.rp_filter = 1

Mod-sfr 787> Configuring kvm-ivshmem

Mod-sfr 788> Configuring busybox-syslog

Mod-sfr 789>  System startup links for /etc/init.d/sysklogd already exist.

Mod-sfr 790> Configuring openssh-sshd

Mod-sfr 791>  Adding system startup for /etc/init.d/sshd.

Mod-sfr 792> Configuring sudo

Mod-sfr 793> Configuring ntpdate

Mod-sfr 794> adding crontab

Mod-sfr 795> Configuring update-modules

Mod-sfr 796> INIT: Entering runlevel: 5

Mod-sfr 797> Starting OpenBSD Secure Shell server: sshd

1 REPLY 1
Patrick Weir
Beginner

Never mind it looks like I can session in to finish the installation, my bad