05-19-2009 02:00 AM - edited 03-11-2019 08:33 AM
Hi all
I have firewall with three zones namely inside,outside and DMZ.On the DMZ we have webserver and static NAT is given on the firewall.From outside i can access the webserver using public IP.But from Inside i cannot access on Public IPs or any of Public IPs on our network.Is there any way to access our public IP from inside?
05-19-2009 02:25 AM
You need configure a static nat on the inside interface for the DMZ server IP.
HTH>
05-19-2009 02:29 AM
Thanks Andrew for the quick response can u please give one example
05-19-2009 02:44 AM
I would try something like:-
static (DMZ,inside) <
HTH>
05-19-2009 02:52 AM
Thanks Andrew.but which internal Ip i should give because the server is in DMZ
05-19-2009 02:58 AM
OK - let me explain:-
static (DMZ,inside) <
(DMZ = Source Interface, inside = Destination interface) <
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide