ASA migration to OSPF from static routes

[k.moyers]

Hello,

I have 2 ASAs (5512-x running 8.6) connected by a VPN that I am attempting to migrate to use OSPF instead of the existing static routes.  I already have OSPF working over the VPN. 

I figured that when I am ready to activate the OSPF routes I would simply delete the statics and the OSPFs would get inserted into the routing table and I'd be in business with no downtime.  However when I delete a static the OSPF route doesn't appear until I issue a 'clear ospf 1 process'.  Is this normal?

For a specific example, I have a static route to 192.168.75.0/24 via inside interface.  When I delete this route it is removed from the routing table, but the OSPF route to 192.168.75.0/24 via outside isn't inserted until I issue 'clear ospf 1 process'.  Can anyone explain this or suggest a no downtime workaround?

Thanks.

[paolo bevilacqua]

Wrong forum, post in "security - ASA". You can move your post using the actions panel on the right.

[Julio Carvajal]

Hello K.moyers,

Definetly not expected at all,

Can you check the OSPF database while the static routes are set?

Check my blog at http:laguiadelnetworking.com for further information.

Cheers,

Julio Carvajal Segura