Hello netpros,
I want to NAT a Private IP on DMZ to a specific Public IP, we have the subnet for ex. 7.7.7.0/29 , 7.7.7.1 is the GW and .2 is assigned to the Outside interface.
I did some research and find out that i need only one Static NAT to Let the Private IP go outside with a specific Pub IP.
Lets say that we want the host 172.16.1.9 to be reachable from outside with the IP 7.7.7.3
Example :
object network ServerX
host 172.16.1.9
nat (DMZ,OUTSIDE) 7.7.7.3
So only this command will work ? i mean its just a object, can that take effect to the configuration ?