ASA "Show resource usage"

[7happysun]

Result of the command: "show resource usage"

Resource               Current        Peak      Limit        Denied Context
SSH                          0           5          5            44 System
Syslogs [rate]              77        1804        N/A             0 System
Conns                     4156        9817     280000             0 System
Xlates                    2912        8400        N/A             0 System
Hosts                    15955       24871        N/A             0 System
Conns [rate]                62         984        N/A             0 System
Inspects [rate]             13         584        N/A             0 System

What do you host is mean?

Internet communication is unstable.

is due to host?

[Jouni Forss]

Hi,

I think the "Hosts" probably just refers to unique hosts seen by the ASA. I am not sure if it counts all the hosts. I mean even the hosts on the Internet to which or from which you have connections active to your internal network. I would presume this is the case but cant be 100% certain.

The above output however does not seem to point to any problem with regards to the mentioned resources.

What does your ASA show for commands

show cpu usage

show memory

Do you or your ISP monitor your bandwith usage? Confirm what the bandwith usage is compared to your total bandwith available when you are expiriencing the problems.

You can naturally also check the physical ports on your network devices to see that there is no malfunctioning ports/modules.

- Jouni

[7happysun]

Thank you.

Is currently diagnosed.

Thank you for advice.