ASA simulation in GNS3

[Dennis_an83]

hi all

I have to use GNS3 for simulate ASA5540.but it does not work. can anyone help me with this?

I've installed latest GNS3(0.8.3.1 all in one) in Win7 32bit environment, and used IOS file is asa842-k8.bin.

but i can't unpack it properly. it said "Couldn't find any ZIP header in asa842-k8.bin"....

if some one has been met the samething in before and already resolved somehow then please let me know the solution for this.

greatly thanks for your advise.

Thanks

Taixing

[Milan Rai]

Hey Taixing,

GNS doesn't supports ASA directly as of routers. We need to configure some extra drivers for that one. We need to configure some drive on linux platform.

This would defenitly gona help you out.

www.blog.gns3.net/2009/12/how-to-emulate-cisco-asa/

Plz rate if that helped you>>>>>

[malshbou]

Hi,

you can have ASA 8.4.2 running on GNS3, this is a link for that:

http://www.xerunetworks.com/2012/02/cisco-asa-84-on-gns3/

---

Mashal