01-27-2013 09:41 PM - edited 03-11-2019 05:52 PM
hi all
I have to use GNS3 for simulate ASA5540.but it does not work. can anyone help me with this?
I've installed latest GNS3(0.8.3.1 all in one) in Win7 32bit environment, and used IOS file is asa842-k8.bin.
but i can't unpack it properly. it said "Couldn't find any ZIP header in asa842-k8.bin"....
if some one has been met the samething in before and already resolved somehow then please let me know the solution for this.
greatly thanks for your advise.
Thanks
Taixing
01-27-2013 11:03 PM
Hey Taixing,
GNS doesn't supports ASA directly as of routers. We need to configure some extra drivers for that one. We need to configure some drive on linux platform.
This would defenitly gona help you out.
www.blog.gns3.net/2009/12/how-to-emulate-cisco-asa/
Plz rate if that helped you>>>>>
01-28-2013 12:35 PM
Hi,
you can have ASA 8.4.2 running on GNS3, this is a link for that:
http://www.xerunetworks.com/2012/02/cisco-asa-84-on-gns3/
---
Mashal
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide