ASA Static NAT and Dynamic NAT

[johnlloyd_13]

hi,

just a quick one, i'm trying to save some public IPs.

could we configure static NAT and do dynamic PAT applied on the outside interface?

object network SERVER
 host 192.168.1.1
 nat (inside,outside) static interface 

object network PAT
 subnet 172.27.186.0 255.255.255.0
 nat (inside,outside) dynamic interface

[Akshay Rastogi · Accepted solution]

Hi,

Yes, you could configure this. In this case, traffic initiated from Outside to interface IP address would always be redirected to 192.168.1.1

However for your from Inside, both PAT and Server Object traffic would be able to go out to internet with Interface as mapped IP.

Regards,

Akshay Rastogi