I get my new ASA5506-X home and pop it open, ready to fully configure it, then I get the following error:"With the current license device will only supports 2 fully function interfaces. Third interface can be added but the traffic from this interface...
I have following :ASA 9.2(2)4Defense Center 5.4.1.3ASA firepower Service Module : 5.3.1.5.I am trying to upgrade to Firepower Service Module From 5.3.1.5 to 5.4.0.4-55 I have hard time( am i the only one ??) to find proper documents to tell me what ...
Hello and sorry for my english, On all my switch, i have a SNMP public with read only righti'd like to allow access to SNMP from only 2 IPs and refuse for all to secure the switchsPossible ? thanks
Hi all,I had a small incident or 5 min downtime on a site that is connected via VPN over the internet to the head office. The infrastructure is that all sites including the Head office are terminated on ASA's. The ASA will have a default route goin...
Hi, I cant add a Cisco ASA 5500 (with 8.2 software version ) to Cisco CSM (4.7 software version)I have been able to add 3 Cisco ASA (2 5545 and 1 5555) with 9(2) version successfully Could you help me please? I attach a show tech of a Cisco ASA 5500...
Hi, Is it possible to manage the asa through ssh and https over site-to-site vpn? Instead of opening https or ssh access over the Internet. If yes, please provide sample configuration. Thanks.
From time to time , almost every week we have to reboot ASA firewall. Before I manually hit the button, I noticed there is no DNS communication at time we loose internet connection. Logging to CLI ASA can't ping anything to outside word from outside ...
Is there a way I can have 2 ports, say gi 0/0 and gi 0/1 on the same segment on the 5585? Obviously, 1 of the interface will have an IP address while the other will not. This is similar to interface vlan xx and assigning vlan to a port in the 5505....
Hi all, I have 2 ASA 5506-X with FirePower IPS, URL and malware licenses. I don't have any VMware servers so need to configure through the ASDM. Is there any good tutorials that show me how to manage FirePower within the ASDM?Cheers in advancePhil
I have some ASA firewalls with Firepower modules registered with a Firesight Management Server. We need to take a few of these firewalls and move them to a different Firesight Managment system managed by a different group. I have some policies assign...
How to restore configuration in new FireSIGHT (RMA device)? new FireSIGHT require new license or not ?
Hello, I am currently trying to design a solution for the following example. I have two groups of Billing servers. A Primary group and a back up group. These groups are also in different locations, at each location I have an ASA 5508-X in front of th...
I have URL filtering set up on FireSight and my ASA 5525-X. I have noticed that it does not block unwanted pages.It shows up in Defense Center events as "interactive block with reset", but the page is actually never blocked. It appears to be trying...
Hello everyone,I recently deployed SFR module on ASA 5512-X and I am facing the following issue : One website that is used on a daily basis is blocked since we deployed FirePower services. Actually, it's been categorized as "Malware Site" with a bad ...
Hi,I have ASA-SM pair (WS-SVC-ASA-SM1) in active/standby failover mode currently running 9.0.4 (asa904-smp-k8)I am upgrading to 9.4.1 and first attempt failed giving the following errors for every interface on every context when reloading the standb...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 08-26-2025 09:16 AM | ||
| 07-16-2025 04:21 AM | ||
| 07-06-2025 01:40 PM | ||
| 07-04-2025 01:59 AM | ||
| 06-19-2025 07:32 AM |
| User | Count |
|---|---|
| 8 | |
| 8 | |
| 7 | |
| 1 | |
| 1 |
